MAXIMIZER DT PRO™ – DIRECTIONS FOR USE.

APPLICATION INSTRUCTIONS:

Settling may occur – SHAKE WELL BEFORE USING. For best results, run water for 5 seconds after each application.

Always apply Maximizer DT Pro™ when drains will not be used for 6-8 hours.

KEEP FROM FREEZING and when not using the product make sure the cap is on tight.

RESIDENTIAL DRAINS: Apply 2-ounces to each drain for 5 consecutive days. If drains remain sluggish, extend the treatment for a few more days before starting a maintenance schedule.

Preventative Maintenance: Apply 2-ounces per month directly into each drain.

COMMERCIAL DRAINS: Apply 4-ounces to each drain for 5 consecutive days.

Preventative Maintenance: Apply 2-ounces per week directly into each drain.

GREASE TRAPS: Apply 4 – 12-ounces per day directly into the grease trap or a fixture that leads into the grease trap.

SEPTIC SYSTEMS: For Normally Operating Systems: Apply a 1/2 gallon (64-ounces) directly into the septic tank, or flush it down the toilet.

Preventative Maintenance: Flush 8-ounces down the toilet monthly.

For Failing Systems: Contact your Maximizer DT Pro™ dealer for dosage rates and special instructions.

Note: We highly recommend before starting any type of drain maintenance regimen that the drain lines are electrically cleaned (snaked) and flushed prior to treatment. The reason being is that the product will work much better in maintaining a clean drain line, rather than working much harder to try and restore a failed or failing drain line back to its normal state. 

Residential Drain Treatment Breakdown – How much Maximizer DT Pro do I need to treat my drains?