All systems are different and there are many variables that will affect how much product is needed to keep them clean. These dosage rates are a suggested starting point and may need to be adjusted depending on the results you are seeing. A neutralizer like Kontrol may be needed if pH is low or sanitizers are an issue. Contact your Waste Go® distributor for more information.
GREASE TRAP DOSAGE RATES
Initial Dosage:
Mix and let stand no longer than 1 hour while cleaning the trap. (Remove solids and liquids). Pour mixture into the cleaned trap.
Maintenance Dosage:
Apply every night after all clean-up is done to a drain leading to a grease trap.
*Dosage rate may vary depending on flow, meals served, and sanitizers used. Adjust as needed.
SEWAGE TREATMENT PLANTS / LAGOONS / LIFT STATIONS / COMMERCIAL SEPTIC TANKS
Initial Dosage:
Amount calculated by total volume of tank/lagoon to be treated. Apply for 5 consecutive days.
- 1 lb. for 0 – 16,000 gallons of volume if the tank is dead or has no activity
- 1 lb. for 0 – 25,000 gallons of volume if the tank has some activity but also has solids buildup an scum.
- 1 lb. for 0 – 50,000 gallons of volume if the tank has some activity and minimal buildup.
Example: If you have 300,000 gallons total volume with solid buildup and scum, you would need 300,000 / 25,000 = 12 pounds per day for 5 consecutive days as an initial dosage.
Maintenance Dosage:
- 1 lb. for each 100,000 gallons as a weekly maintenance dosage.
Example: If you have 300,000 gallons total volume the maintenance dosage would be 3-pounds per week. This dosage can be adjusted as needed. If solids and scum start to build up, increase the weekly dosage.
Waste Go® Application Instructions PDF (print or download)
Your Waste Go® National Authorized Distributor:
Drainage Solutions LLC • 7014 13th Avenue, Ste: 945 • Brooklyn, NY. 11228